- Koi For Sale Goldfish For Sale
-
Categories
- Fall and Winter Prep
- Fish Antibiotics
- Flow Meters
- Fountains
- Koi Books and DVDs
- Koi Care Kennel Products
- Koi Food
- Koi Nets
- Lake Management
- New Pond Supplies
- On Sale
- Plant Food and Fertilizer
- Pond Accessories
- Pond and Lake Aeration
- Pond Drains
- Pond Filter Media
- Pond Filters
- Pond Heaters
- Pond Kits
- Pond Lighting
- Pond Netting
- Pond Plumbing Supplies
- Pond Pre Filters
- Pond Pumps (External)
- Pond Pumps (Submersible)
- Pond Skimmers
- Pond Vacuums
- Pond Water Treatments
- Spring and Summer Prep
- UV Sterilizers
- Water Test Equipment
- Waterfalls
-
Shop by Brand
Ponding Resources
Koi Market Info
Water Jets are an extremely important part of a successful pond. The Mazzei type jet is one of the most efficient jets used on today's pond designs. It produces approximately 80% of the flow an Eductor creates but it's much smaller in size.
Reducers: These reducers are used to reduce the outlet of the jet line into the pond, which should be 1 1/2 inch pipe, to 3/4 inch female thread. This will now allow an Eductor or Mazzi jet to be screwed into it. The standard 1 1/2 inch to 3/4 inch reducer bushing can be found at some hardware stores and is for use with a 1 1/2 inch bulkhead with threads on liner ponds.
The Special Reducer is designed for gunite or concrete ponds where the 1 1/2 inch pipe for the jets extend into the pond. The pipe is cut off flush with the plaster and then the Special Reducer is tapped into the inside of the 1 1/2 inch pipe.
Reducers: These reducers are used to reduce the outlet of the jet line into the pond, which should be 1 1/2 inch pipe, to 3/4 inch female thread. This will now allow an Eductor or Mazzi jet to be screwed into it. The standard 1 1/2 inch to 3/4 inch reducer bushing can be found at some hardware stores and is for use with a 1 1/2 inch bulkhead with threads on liner ponds.
The Special Reducer is designed for gunite or concrete ponds where the 1 1/2 inch pipe for the jets extend into the pond. The pipe is cut off flush with the plaster and then the Special Reducer is tapped into the inside of the 1 1/2 inch pipe.
You may be interested in these items:
Starting at:
$79.00
Starting at:
$298.95
